Are you ready to transform your space with beautiful laminate flooring and want to know how to install it?
You can install laminate flooring like a pro in just five key steps:
- Gather all the tools and materials you’ll need
- Prep the subfloor
- Lay down the underlayment
- Install the laminate planks
- Finish it all off with trim and edging
With this guide, you will know how to install laminate flooring quickly! Let’s get started!
1. Gather the Necessary Tools and Materials
To begin installing the laminate flooring, gather all the necessary tools and materials for the job. Start by making a checklist to ensure you have everything on hand.
You’ll need a tape measure to measure the room’s dimensions and the laminate planks accurately. A circular saw or a jigsaw will be necessary to cut the planks to the right size.
Remember to have a good quality underlayment to provide insulation and soundproofing. You’ll also need spacers to maintain the correct expansion gap between the flooring and the walls. A rubber mallet will come in handy for gently tapping the planks into place. Lastly, ensure you have enough laminate flooring planks and the necessary adhesive or click-lock system to secure them.
2. Prepare the Subfloor for Installation
Step two is installing laminate flooring, preparing the subfloor for installation, gathering any necessary tools and materials and ensuring the surface is clean and level. This step is crucial to ensure a smooth and successful laminate flooring installation.
Here are four key things to keep in mind:
1. Remove any existing flooring: Before installing the laminate flooring, you must remove any existing flooring materials such as carpet, vinyl, or tile. Make sure to clean the subfloor thoroughly once the old flooring is removed.
2. Inspect and repair the subfloor: Check the subfloor for any signs of damage, such as cracks or uneven areas. Repair any issues to ensure a level surface for the laminate flooring.
3. Level the subfloor: Use a levelling compound to fill in any low spots or uneven areas on the subfloor. This will help prevent any bumps or gaps in the laminate flooring.
4. Clean the subfloor: Sweep or vacuum the subfloor to remove any dirt, dust, or debris. Ensure the surface is clean and free from any obstacles affecting the installation process.
3. Lay Down the Underlayment
Once you have prepared the subfloor, it’s time to lay down the underlayment. The underlayment is a crucial step in the installation process as it provides a smooth and stable surface for your laminate flooring.
Start by rolling out the underlayment across the entire floor, making sure to overlap the seams by a few inches. Use a utility knife to trim excess underlayment along the room’s edges.
It’s important to ensure the underlayment is completely flat and free of wrinkles or bubbles before moving on to the next step.
Once the underlayment is in place, you can install your laminate flooring, knowing that you have created a solid foundation for a beautiful, durable floor.
4. Install the Laminate Flooring Planks
Now, it’s time to lay down the laminate flooring planks. This is where you’ll see your new floor come to life.
Follow these four steps to ensure a smooth and successful installation:
1. Start in the corner: Begin by placing the first plank in the left corner of the room, with the groove side facing the wall. Leave a small gap between the plank and the wall to allow for expansion.
2. Interlock the planks: Slide the next plank into the groove of the first plank at a slight angle. Gently press down to lock them together. Continue this process, row by row, until the entire floor is covered.
3. Cut when necessary: Measure and cut the planks to fit around the room’s doorways, corners, or any other obstacles. Use a saw or a laminate cutter for precise cuts.
4. Maintain proper spacing: Leave a ¼ inch gap between the planks and the wall on all sides. This will accommodate for any potential expansion or contraction of the flooring.
5. Trim and Finish the Edges
To achieve a polished look, regularly trim and finish the edges of the laminate flooring planks.
After installing the laminate flooring planks, you’ll notice that the edges might be uneven or protruding slightly. This is where the trim and finishing steps come in.
Using a saw or a laminate flooring cutter, carefully trim the edges of the planks to ensure a smooth and even finish. Make sure to measure and mark the areas that need trimming beforehand to avoid any mistakes.
Once the edges are trimmed, it’s key to finish them properly. You can use a laminate floor sealant or a matching trim piece to cover and protect the edges.
This will give your laminate flooring a clean and professional appearance.
Clean and Maintain Your New Laminate Flooring
The last step is to install laminate flooring. To ensure longevity and a pristine appearance, it’s essential that you regularly clean and maintain your new laminate flooring. Here are four key steps to help you keep your laminate flooring looking its best:
1. Sweep or vacuum regularly: Remove dirt, dust, and debris by regularly sweeping or vacuuming your laminate flooring. This will prevent scratches and keep the surface clean.
2. Wipe up spills immediately: Laminate flooring is durable, but cleaning up spills as soon as they happen is still important. Use a damp cloth or mop to remove liquid and prevent damage or staining.
3. Avoid excessive moisture: While laminate flooring is resistant to moisture, it’s best to avoid excessive amounts. Clean up any water spills promptly and use a damp mop, not a wet one, when cleaning.
4. Use appropriate cleaning products: Choose those designed for laminate flooring to avoid damage. Avoid harsh chemicals or abrasive cleaners that scratch or dull the surface.
Installing laminate flooring can be relatively easy and straightforward if you follow the five key steps in this article.
By gathering the necessary tools and materials, preparing the subfloor, laying down the underlayment, installing the laminate planks, and trimming and finishing the edges, you can achieve a beautiful and durable flooring option.
Remember to regularly clean and maintain your new laminate flooring to keep it looking its best for years. We hope this article helped you understand how to install laminate flooring!